SY010-PCB Datasheet
Overview
The Sensry Kallisto® embeds sensing, processing, energy management and radio communications in one monolithic size-optimized PCB module. The PCB module also provides core and an optional part of sensors and power management add-ons to enable a huge variety of IoT applications. Moreover, the Sensry Kallisto® ecosystem provides a hardware abstraction layer that allow developers to seamlessly interact with the module and its features in order to reduce the development cycle. This includes also OTA updates of the firmware SDK and the user software. Bluetooth® LE antenna and matching network onPCB; embedded low power sensors: 16-bit IMU and geomagnetic sensor; optional ambient sensors and wireless charge capability. Firmware and software development tools; Pre-programmed Bluetooth LE protocol stack; over-the-air firmware updates. Designed to be seamlessly integrated in different architectures, to allow for shorter development cycles and stimulate the creation of new IoT solutions.
General Features
- PCB core module
- Multiprotocol Bluetooth® Low Energy
- Antenna-on-Module
- Low power ARM microcontroller
- Low power 3-axis accelerometer
- Low power 3-axis gyroscope
- Low power 3-axis geomagnetic sensor
- Temperature
- Humidity
- Air Pressure
- Battery fuel gauge
- LiPo charger
- PCB additional sensor & wireless charge module (optional):
- VOC
- Light Sensor
- Wireless Qi Power Receiver
- USB connector for power supply
Target Applications
- Wireless Wearable Technology
- Wireless connected sensors for healthcare
- Wireless connected sensors for healthcare, sport, fitness and industrial applications
- USB connector for power supply
- Wireless for IoT applications
- Wireless connected objects
- Wireless connected presence sensors
- Wireless Home automation
- Beacons
Technical Data
Mechanical Parameters
| Parameter | Value |
|---|---|
| Board type | High density Module with Top-side Assembly |
| Size (L x B x H) | 28 mm x 11.5 mm |
| Antenna | on-board chip antenna |
| Power | microUSB or Wireless QI Charge (Coil needed) |
| LED | BLE connection |
Board Layout
| Item | Description |
|---|---|
| Green Rectangle | Core Module |
| Yellow Rectangle | Additional Sensor & Wireless Power |
| Red Rectangle | JTAG Debug Interface |
| 1 | IMU |
| 2 | Light |
| 3 | Environment |
| 4 | Magnetometer |
| 5 | Air Quality |
For further questions, development, and programming support, and for access to our dedicated Gitlab repository, please contact our support via support@sensry.de.